Concrete Boom Pump :


    DOWNLOAD THE CATALOGUE
    SEE THE VIDEO    An indigenous solution that ensures faster completion of job and reduced down time. Available in lengths of 20 m, 32 m and 36 m. The boom allows quick setting-up by overcoming the necessity of cumbersome pipeline lying.

    Key Features :

    • Effective reverse pumping and reverse cleaning
    • Digital hour meter
    • Digital temperature display
    • Suitable for two axle chassis
    • Less ground space required
    • Anti Stalling Device (ASD) to save engine overloading
    • Remote control for boom operations
    • Pump unloading valve to shut-off oil flow of hydraulic pump
      during blockages
    • Maintenance friendly
    • RPM and output regulation
    • Water separator with display
    • High pressure cleaning pump with large water tank
    Slave Engine Design
    • Fuel Efficient, reduces per cubic meter cost.
    • Reduced Erection & Commissioning Time.
    • Reduced Installation Expenses
    • Enhanced Services Life OF Prime Mover
    • Enhanced Power Transmission Efficiency due To direct drive
    Handy Remote Control
    • State-of-Art Handy & Light weight Cable Remote Control.
    • Unit With All The Pump & Boom Functions In- Built
    Centralized Oil Lubrication System
    • For Selected Points & also EASY Access Manual Grease Lubrication System To All Points.
    Fully Hydraulic open Loop Control system
    • The Pump Regulator Protects The Hydraulic System From Overheating & Engine From Overloading.
    • The Regulator Also Helps In Output Regulation & Improved Fuel Efficiency.
    Modular Type Boom Control Block
    • Occupies Less Space & Is Adaptable to Proportional boom Movement.
    • Two – Hand Operation Control Of Outriggers Ensures Safety In Operation.
    Boom Material
    • Boom Made Of High Strength Alloy Steel From Sweden Gives Maximum Strength & Performance And Minimum Weight Of The Structure.
    BOOM
    Specifications/Model unit 20.07 32.07 36.07 32.09 36.09
    Arms no. 3 4 4 4 4
    Boom Folding   z R R R R
    Chassis allowable GW MT 16 25 25 25 25
    Horizontal reach (max.) m 16.4 28.2 32 28.2 32
    Vertical reach (max.) m 20 31.9 35.6 31.9 35.6
    Reach depth m 9.5 21.1 24.1 21.1 24.1
    Unfolding height m 5.5 7.8 8.3 7.8 8.3
    Slewing range deg 365 370 370 370 370
    Delivery Line Diameter mm 125 125 125 125 125
    Length of end hose DN 125 m 3 3 3 3 3
    Max. Hydraulic Pressure bar 300 300 300 300 300
    Electrical System VDC 24 24 24 24 24
    Power Drive kW 80 82 82 82 82

    Concrete Pump
    Specifications Unit 20.07 32.07; 36.07 32.09; 36.09
    Concrete Output max. theoretical Cubic m/ hr 65 65 85
    Concrete pressure max. theoretical Bar 71 71 54
    No. of Strocks/ min No 25 25 25
    Delivery Cylinder Diameter mm 200 200 230
    Piston Stroke Length Mm 1400 1400 1400
    Hydraulic Transmission Ratio (rod side)   1:4.9 1:4.9 1:6.5
    Easy Clean Hopper Capacity Lit 600 600 600
    Water tank Capacity Lit 500 700 700

    Technical Speciifications
    • *Value for hydraulic fluid being fed to piston side.
    • **Distance to be read as either horizontal or vertical.
    • The concrete is pumpable & follows DIN1045 standard.
    Note: Performance of equipment is based on standard working conditions. Design / Specifications can be changed without prior notice
    • Slave Engine design for Enhanced Boom Pump Efficiency.
      • Fuel Efficient, reduces per cubic meter cost.
      • Reduced Erection & Commissioning Time.
      • Reduced Installation Expenses
      • Enhanced Services Life OF Prime Mover
      • Enhanced Power Transmission Efficiency due To direct drive
    • Handy Remote Control for Boom Pump
      • State-of-Art Handy & Light weight Cable Remote Control.
      • Unit With All The Pump & Boom Functions In- Built
      • Fully Hydraulic Open Loom Control System.
    • 20.07
    • 32.07
    • 32.09
    • 36.07
    • 36.09