Clean Sweep Microfilters
     
    Air Filter

           Dirt, oil and vapour coming through Compressed Air without getting filtered could eventually have adverse effects on your end products. These contaminants have to be periodically filtered through effective means to increase the performance of pneumatic tools.

    Oil and water is present both in liquid and vapour state. Complete liquid oil and water is removed by coalescing filters manufactured by trident, which has a filter media (boro silicate micro glass fibres). Oil vapour is removed by activated carbon filters.

    Operation

              Two types of filters are available in this series. They are the coalescers and interceptors. Coalescing filters are made from Borosilicate glass fibre. These fine strands of glass fibre can coalesce the finest of oil and water aerosils. The fine oil or water droplet coalesces to form a large droplet which falls below because of gravity. These are typically 0.01 micron filters.

              The interceptors are used for particle removal. They are used for after filter in desiccant dryer or general use for fusal instrument protectors. These filters have a very low pressure drop.

    Salient Features
      Automatic drain valve as standard fitment
      Particles upto 0.01 microns are also filtered at lower efficiency 
      Very low pressure drop. 1 PSI for dry media and 2-3 PSI for wet media
        with 10-20 wt oil 
      Status indicator
      Different coalescer grade for various applications 
      Maximum oil carry over of 0.008 ppm w/w

    Application

              Trident condensate sensing drain valves are suitable for all compressed air systems like : 

      Sensitive and CNC m/c 
      Painting systems 
      Instruments
      Packaging

    Specification

     

    Filter Element Borosilicate
    Housing Aluminium Pressure die Casting
    Coating-External Internal Anticorrosive epoxy Paint
    Particle removal ( micron) 0.01
    Max.oil Carryover at 21C (mg/m ) 0.01
    Max.Working Temperature 80
    Initial Pressure Loss
    ( kg/cm)
    0.1
    Pressure Loss for Element Change (Kg/cm) 0.7
    Drain Type Internal Automatic


    TECHNICAL DATA
    Model
    Pipe Size
    BSP
    Flow Rate
    Max Working
    Pressure Kg/cm
    Housing Dimensions (mm)
    Weight
    Kgs
    Repl.
    Element
    m/n
    scfm
    A
    B
    C
    D
    E
    T 24Y
    1/4"
    25
    15
    16
    72
    19
    193
    100
    22
    1
    M 24Y
    T 100 Y
    1/2"
    101
    60
    16
    96
    20
    237
    150
    221
    1.5
    M 100Y
    T 250 Y
    1"
    256
    150
    16
    117
    34
    465
    300
    56
    3.5
    M 250 Y
    T 600 Y
    1.5"
    595
    350
    16
    117
    34
    530
    425
    56
    4
    M 600 Y
    T 860 Y
    2"
    850
    500
    16
    170
    64
    722
    480
    56
    10.5
    M 860 Y
    T 1220 Y
    2"
    1206
    710
    16
    170
    64
    722
    550
    56
    11
    M 1220 Y
    T 1820 Y
    3"
    1809
    1065
    12
    235
    72
    760
    550
    56
    20
    M 1820 Y