Sintex Industries Limited

About Products

SINTEX have tied up with the world leaders M/s Aqua Nishihara Corporation Ltd., Japan having experience of more than 100 years in the field of domestic waste water treatment plant.

Sintex Package Sewage Treatment Plant

• Environmental Impact Assessment (EIA) norms all over the country demands treatment of sewage at site wherever central sewage plants are not available.
• Sintex’ Package Sewage Treatment Plants (PSTP) has proved to be one of the best for meeting these norms in the most efficient manner.
• Sintex’ PSTP are based on anaerobic and aerobic treatments and are required to be installed underground and thus, overall footprint of these plants is the lowest compared to MS/FRP package plants.
• In ‘Sintex’ PSTP you need to remove sludge once in a TWO year only as against removal of sludge in every 15 days in other plants.They are also energy efficient and need very little power to run the blower.
• We have completed Hundred installations all across the country and solving problems of sewage treatment at site in large complexes, institutions, malls, industries, housing colonies, educational complexes, hostels, hotels, resorts etc. Please find attach herewith soft copies of leaflets for your kind reference.

Sintex- Decentralized Package Sewage Treatment Plant (NBF Series):

It is ideal for your medium to large residential & commercial complexes

• Pl find operation principle of the system in a separate document
• It is a sewage treatment plant
• sludge handling is once between 24 months
• sludge drying bed is not required
• Uniformity in strength and performance
• Small land area required
• Flexibility to site conditions
• Aesthetic view
• Easy to handle & simple, fat to install
• No noise and odour nuisance
• Can be upgraded & relocated if required
• Reduces water use
• Low running cost of air-blower
• Capacity 10 KLD to 150 KLD

Sintex- Decentralized Package Sewage Treatment Plant (PWTS Series):

• The capacity ranges from 800 to 6000 l/d.
• The sludge removal takes place once in a year.
• Good temperature insulation.
• No odour nuisance.
• Aesthetic view.
• Compact design with no below ground moving parts.

Sintex has two models in PWTS series.

• PWTS-AM without blower gives 70% of BOD reduction from the final outlet.
• PWTS-STBF With blower gives more than 90 % of BOD reduction from the final outlet. Treated water can be used for non-potable use like irrigation, gardening.

Sintex-Anaerobic FRP Septic tanks:

It is used for basic treatment of waste water and is ideal for your medium to large residential & commercial complexes.

• Corrosion free, Leak proof
• Lightweight
• Small land area required
• Flexibility to site conditions
• Easy to handle & simple, fat to install
• Aesthetic view
• Good temperature insulation
• Aesthetic view
• No noise and odour nuisance
• Can be upgraded & relocated if required
• Capacity from 10 KL to 50 KL and can be joined in series/parallel

Sintex-Anaerobic FRP Septic tanks:

They are ideal for use in underground sewer pipe lines, storm water pipe lines and water pipe lines. “Sintex” Manholes will solve all your problems associated with corroded, leaking & sinking conventional brick & masonry Manholes.

• Constructed as per ASTM D-3753 standards
• Fiberglass composition withstands attack of hydrogen sulfide corrosion
• Lightweight and structurally sound
• Withstand H-20 axial loads
• Monolithic construction and no field joints
• Reduces ingress into the manhole
• Available in Diameter of 4', 5', 6' & 8' with ht from 3' to 42'